| |
| |
|
WAC-99 is a highly concentrated multipurpose Latex Emulsion based liquid modifier useful as an additive for concrete mortars in repair / Water proofing applications as well as protective coating to cementitious substances. |
|
| |
 |
| Technical View |
|
|
| Appearance |
: |
Milky White |
| Base |
: |
Modified Acrylic |
| State |
: |
Liquid Emulsion |
| PH |
: |
8 to 9 |
| Solid Content |
: |
50±2% |
| Coverage |
: |
60-70 sq.ft./kg. (Depends on surface) |
| Specific Gravity |
: |
1.1 |
| Pot-Life @ 300C |
: |
30 min. |
| Application |
: |
Above 100C & below 450C Temp. |
| Depth of |
: |
(Accelerated Carbonation Test)
2 hours : Nil
4 hours : Nil |
| Thickness |
: |
10-30 mm |
| |
|
|
|
|
Multiple Advantages
• Produces high compressive flexural and tensile strength for durable repairs.
• White brushable liquid
• Useful as bonding agent for old and new concrete.
• Useful as an additive to water proofing mortars / concrete.
• Excellent as a protective coat cementitious substances.
• Antimicrobial, prevent fungal & bacterial growth, economical in application.
• Excellent barrier to carbon dioxide, chloride, sulphate & nitrates ions, for carbonation resistance coating for protection of
concretesubject to adverse climatic conditions.
• Highly elastomeric and crack bridging characteristics.
• Prevent corrosion
• Very low water absorption.
Application Procedure
• Surface for treatments must be thoroughly cleaned of all laitance, loose materials, oils, greases etc.
• Mix WAC-99 water and cement thoroughly in 1:1:3 proportion in weight.
• Pre wet the surface before application.
• Apply 1st coat, allow it to dry for 30 minutes.
• Apply second coat and allow it to dry.
• If required overlay concrete screed / mortar when 2nd coat is tacky.
• Cure the screed / mortar for minimum 3 days.
At the time of Construction :
When used as an admixture with cement concrete mortar it works as a hardner, wetting and finishing agent. For fast setting it is recommended in cement concrete mixture @ 100gms. To 500gms. Per bag of cement (50kg.) When used with cement curing is must as per norms.
Area of Application (External coating) :
• Bridges, decks, parking areas in highways
• Reinforcement steel to prevent corrosion
• Stepping terraces and flat roofs
• Repairs of worn, damaged & spoiled concrete
• For injection, pressure & precision grouting.
• Kitchen, bathrooms, side walls, swimming pools, safety Tanks etc.
At the time of Painting :
With Water based paints (synthetic & acrylic) It can be used to enhance life and brightness.
• 20% WAC-99 for exterior (4kg. In 20kg. of any water base paint)
• 10% WAC-99 for interior
(2kg. In 20kg. of any water base paint).
Precaution & Limitations : Container should be tightly closed after application. Clean tools with water. Note : Above informations are given in good faith, ICO Ltd. are not responsible for any misuse, mishandling & claims.
Disclaimer : The product information & application details has been given in good faith and as a general
guideline. The company does not assume liability for unsatisfactory results and damage.
Available Packings
100 g., 500 g.,1 kg., 5 kg., 10 kg., 20 kg., 50 kg., 220 kg. |
|
| |
|
