| |
| |
|
Epoxy Floor Screed |
| |
|
Product : It is a two component solvent free
self leveling wear resistant high viscus, epoxy compound.
Advantage :
Excellent resistance to chemical & high abrasion. It is wear resistant and water impermeable. The flooring compound is capable
of with standing high loading with excellent scretch resistance.Easily applied as a universal screed in all Industries with a coloured overcoating of epoxy/polyurethane based coatings. Has excellent abrasion and chemical resistance, with a medium resistance for impact at higher thickness of application. Can also be used for small repairs to concrete industrial floors. Seamless, dust free,
hygienic and non-slip surface. High early strength, hence floor can be used quickly. Can be used in preparation of perimeter edge
coving upto a height of 225mm.
How to use :
Clean the surface for oil, laitance and loose particles. See the surface is fully dried. Prime the surface with EFP-99. Mix the two component as per the ratio prescribed. Let it stand for 10 minutes before application.
Application :
In chemical and engineering industries, refineries, paint shops, battery rooms, internal loading and unloading bays and ramps. As a protective coating for steel & concrete structures in various industries. Can be applied on Walls / ceilings.
Consumption :
2mm thick at 3 kg./m2
Technical Information :
• Pot life : 30 min at 300C.
• Foot traffic : After 24 hrs.
• Compressive strength : 80 N/mm2 at 7 days.
• Flexural Strength : 27 N/mm2 at 7 days.
• Tensile Strength : 14 N/mm2 at 7 days.
• Full Cure & Chemical resistance : 7 days at 300C.
• Over Coating Time : Min 6 hrs at 300C. Application Temp : 150C to 350C.
|
|
|
