| |
|
A new generation of Silicones for Construction
Standard Compliance : British Standard BS : 6744 – 1992
|
Description : It is silicon based water repelant for exterior
brick & stone masonary surface.
Feature & Benefit :
• Penetrates in the surface and also forms a film.
• Ready to use, brush or spary applied.
• Clear coating, non staining. Does not affect the exterior decorative
colour but allows moisture to evaporate out.
• Prevent efflorescence and growth of fungus.
• Cost effective.
• Single coat application.
• Microporous - Allows surface to breath
• Highly Concentrated V Colourless
• Self Cleaning V Uv-resistance
• Strong bond & Eco-Friendly
• Treatment For Natural Finish On Exterior Surface.
How to use : Surface should be dry and free from all debris, dirt, oil, greases, wax and all other contamination, which could prevent penetration. Apply two liberal coat of SWR-99 by brushing / spary / roller evenly on the prepared surface. Allow the surface to dry for a minimum of 24 hrs. for best results. SWR-99 can also be applied with an airless spray (0.07-0.1 N/mm2 pressure)
Typical Application :
• Cement painted surfaces, concrete, mortar, clay brick surfaces etc.
• Natural and artificial stones.
• Mangalore tiled roofs.
• Corrugated AC sheet roofing etc.
Technical Information :
Appearance : Clear Specific Gravity 0.80 ±0.02
Dosage / Coverage :
• Approx. 2-4 m2 (on brick wall)
• Approx. 3-5 m2 (on plastered surfaces)
• Approx. & 8 m2 on stone and tiles
Packing Available : 1 litre, 10 litres & 220 litres
|
|
