| |
| |
|
WPC-99 is a boon for modern living. It is an amazing, powerful chemical to stop water leakage & dampness from cement concrete structures like terraces, water tanks, kitchens, bathrooms, sidewalls, swimmingpools, safety tanks, bridges, dams, cannals etc. It is easy tohandle eco-friendly, water thinnable, stable on dilution, economical, ready to use anywhere anytime. |
 |
| |
Technical View
| Product |
: |
WPC-99 Specific Function : Water Proofing |
(e) Odour |
|
Characteristic |
| Characterization |
: |
Powerful, eco-friendly, water based, hygienic Chemical Data |
(f) Specific Gravity |
: |
1.1 |
| Chemical Data |
|
|
(g) Surface Drying |
: |
5 minutes |
| (a) Chemicals |
|
Performance blend of synthetic Resins, Emulsifiers, Hardner, Wetting agents, Plasticizers, Pigments, Preservatives, Fungicides, Biocides etc. |
(h) Dried film |
: |
Transparent (Film thickness : 80-100 microns per coat) |
| (b) Composition |
|
Proprietary Physical Data |
(i) Solubility after |
: |
Fully stable, not soluble in water drying |
| Physical Data |
|
|
(j) Film hardness |
: |
After 24 hour - 0.9kg. After 48 Hour - 1.0 kg. on concrete |
| (a) Physical Form |
: |
Free flow liquid (Pinkish) |
(k) Slump Test |
: |
Cement ± 0.2% WPC-99 - 25 Minutes |
| (b) Solids |
: |
50% ± 2% |
|
|
Cement ± 0.4% WPC-99 - 15 Minutes |
| (c) pH |
: |
8-9 |
|
|
Cement ± 1% WPC-99 - 10 Minutes |
| (d) Solubility |
|
Readily soluble in water |
(l) Coverage |
: |
80 to 100 sqft. Per Kg. (Depends on surface) |
How to Use
• Clean the external surface from oil, dust, fungus, grass roots, rust & loose material with wire brush, shot blasting and finally
vacuum cleaning is suggested for the best results
• Fill up gaps & cracks of surface with mixture of cement or mortar mix & 25% WPC-99 in water.
• Wash the surface with SAC or clean water by cloth or sponge and let it dry fully.
• Stir well and mix one part of WPC-99 with 1 part of clean water.
• Apply the solution by painting brush, roller or spray on the clean washed and dried surface.
• After 40 minutes of 1st coat, apply 2nd coat of WPC-99. If required give 3rd coat after another 40 minutes.
• After application as above, WPC-99 dries within 10 minutes on the applied surface & within 6 to 8 hours the surface becomes
fully waterproof and usable.
• Don't keep container open, replace the cap. Wash brush immediately after use.
Precaution & Limitations :
If splashes on body, wash with soap and excess of water immediately.
For Perfect Plastering
For perfect and lifetime plastering on old or new concrete or bricks work give a direct coat of WPC-99 by brush or spray without water on the surface and immediately spread washed & dried fine sand on the coated surface. The screeded surface can be plastered any time. Do not hatch concrete surface for plastering work or add to new concrete which badly effect strength of concrete due to hammering and develops hair cracks throughout the structure of building.
Disclamer : The product information & application details has been given in good faith and as a general guideline. The company does not assume any liability for unsatisfactory results and damage.
Available Packings
100 g., 500 g.,1 kg., 5 kg., 10 kg., 20 kg., 50 kg., 220 kg. |
|
| |
|
