Engineer Plus Rust Arrest (RAT-99)
RUST ARREST (FOR CLEANING RE-BARS & STEEL SURFACES)
RUST ARREST – 3 in 1 is a single component derusting and phosphating chemical effectively works at ambient temperature on mild steel.
It is a most economical product which works in three ways efficiently by cleaning, derusting and developing a thin passive film of zinc phosphate on mild steel.
A new generation of Silicones for Contruction Standard Compliance :
British Standard BS : 6744 – 1992 Description : It is silicon based water repelant for exterior brick & stone masonary surface. Feature & Benefit : . Penetrates in the surface and also forms a film.
• Ready to use, brush or spary applied. Clear coating, non staining. Does not affect the exterior decorative colour but allows moisture to evaporate out. Prevent efflorescence and growth of fungus. Cost effective. Single coat application. Microporous – Allows surface to breath. Highly Concentrated V Colourless. Slef Cleaning V UV resistance. . Strong bond & Eco-Friendly Treatment For Natural Finish On Exterior Suraface.
RAT-99 PRICE LIST
|Packing||M.R.P. per liter/KG||M.R.P. per pack||Standard Cartoon Pack|
|5 kg||234||1168||02 pcs|
|25 kg||217||5415||01 Jar|
|55 kg||200||10981||01 Jar|
TEHNICAL DATA :
- Appearance : Liquid – Yellow to Brown
- PH : Acidic
- Sp. Gravity : 1.2 +0.05
- Coverage : >20m2 /kg
- Self Life : 3 years from the date of manufacturing in unopened condition
Cement painted surfaces, concrete, mortar, clay brick surface ect. Natural and artificial stones. Mangalore tiled roofs. Corrugated AC sheet roofing etc.
- Simple application by brush or immersion / spray
- Ready to use.
- Penetration & effect: Effective rust removal even from areas difficult to reach & penetrate.
5 kg, 20 kgs, 50 kgs
Other Product Categories Available:
Engineer Plus has wide range of waterproofing & construction chemical which includes.
* Waterproofing Products * Exterior Coating Products
* Repair Product * Tile Fixing Range
* Sealants * Concrete Admixtures
* Flooring Products * Grouts
How to apply:
(1) Surface preparation : Incase of heavy rusting or loose scaling remove rust, by wire brush , chipping , hammering or grinding so that majority of rust scale is removed.
(2) Apply Engineer Plus Rust Arrest on affected surface by using cotton waste swab or by brush application. Leave the surface to react with Engineer Plus Rust Arrest for at least 15 to 30 minutes.
(3) The rusty surface will change its colour to original blackish steel, remove the same with cotton cloth.
(4) Then remove the loose rust particles by scrubbing or simple dusting with the brush
(5) Wash the steel surface with water jetty to remove all the acidic residue left on the bar, and clean with cotton cloth.