Engineer Plus WAC-99

|

WAC-99 is a highly Concentrated multipurpose Latex Emulsion based liquid modifier useful as an additive for concrete mortars in repair/Water proofing application as well as protective coating to cementious substances.

engineer plus wac 99

WAC-99 PRICE LIST

PackingM.R.P. Cartoon Pack
100 Gms.62100 Pcs.
500 Gms.28730 Pcs.
1 Kg.54610 Pcs.
5 Kg.25904 Pcs.
10 Kg.49002 Bucket
20 Kg.96601 Bucket
50 Kg.234501 Jar
220 Kg.1001001 Drum


For Discount And More Info Click Here

Technical View:

Appearance                  : milky white

Base                             : modified polymer

State                            : liquid Emulsion

pH                                : 8 to 9

Solid Content               : 50 + 2 %

Coverage                      : 60-70 sq.ft/kg (Depends on surface)

specific  Gravity            : 1.1

Pot-Life @30°C            : 30 min

Application                   : Above 10°C & below 45°C Temp.

Depth of                       : (Accelerated carbonation Test)

                                       2 hours :Nil

                                       4 hours : Nil

Thickness                      : 1-5 mm 

Multiple Advantages:

  •  Produces high compressive flexural and tensile strength for durable repairs.
  • White brushable liquid.
  • Useful as bonding   agent for old and new concrete.
  • Useful as an additive to water proofing mortars/concrete.
  • Excellent as a protective coat  cementitous substances.
  • Antimicrobial prevent fungal & bacterial growth economical in application.
  • Excellent barrier to carbon dioxide , chloride, sulphate & nitrates icons, for carbonation resistance coating for protection of concrete subject to adverse climatic condition .
  • Highly elastomeric and crack bridging characteristics.
  • Prevent corrosion
  • Very low water absorption.

Area of application (External coating):

  • Bridges, decks, parking areas in highways
  • Reinforcement steel to prevent corrosion.
  • Stepping terraces and flat roofs.
  • Repairs  of worn, damaged  & spoiled concrete.
  • F o r injection, pressure & precision grouting.
  • Kitchen  bathrooms, side walls swimming pools, safety Tanks etc.

Application procedure:

  • Surface for treatment must be thoroughly cleaned of all laitance, loose materials, oils , greases etc.
  • Mix WAC-99-10kg  water and cement thoroughly in 1:1:3 proportion in weight.
  • Pre wet the surface before application
  • Apply 1st coat allow it to dry for 30 minutes
  • Apply second coat and allow it to dry.
  • If required overlay concrete screed/mortar when 2nd coat is tacky
  • Cure the screed/mortar for minimum 3 days.

Available Packings:

100g., 500g., 1 kg., 5 kg., 10 kg., 20 kg., 50 kg., 220 kg.

https://youtu.be/u03L9HkPhP8