Epoxy Floor Coating | Floor Coating | Industrial Floor Coatings

Epoxy Floor Coating | Floor Coating | Industrial Floor Coatings

Epoxy Floor Coating | Floor Coating | Industrial Floor Coatings

Chemical Mould Release Agent for Concrete Formwork

ECP 99 is a specially formulated blend of mineral oils and specialty chemicals having release properties.

Which are superior to those of conventional mold oil.

The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mold.

Thereby enabling easy stripping mold from concrete and acting as a protection to steel and wooden form-work.

ECP 99 is supplied as a ready to use clear low viscosity liquid for direct application and use.

Epoxy Floor Coating | Floor Coating | Industrial Floor Coatings

It is used on most types of form-work to give an optimum release.

The quality of the surface finishes to concrete over a wide range of designs.

Supplied ready to use and can easily be applied by sprayers, squeegee or brush.

Need not be thinned.

Epoxy Flooring Ico Care

Features

  • Provides a clean positive release even in intricate and difficult casting condition.
  • Reduces labor cost, cleaning time and possible damages to the form-work.
  • ECP 99 assists the production of uniform mat stain-free concrete surfaces with reduced incidents of blowholes and surface blemishes.
  • ECP 99 is unaffected by strong sunlight, drying winds and foot traffic and can be applied to damp form-work.
  • On account of the high rate of coverage, the applied cost of ECP 99 compares favorably with that of conventional mold oil.
  • Having regard to the technical benefits additionally obtained, the overall economy of using ECP 99 can be significant.
  • Pockets of air, trapped on the shuttered faces of the concrete, are a major cause of imperfections, necessitating remedial work.
  • The hydrophobic surface produced by a chemical reaction between ECP 99 and cement repels surplus water at the interface of the mold and by protecting the concrete from its effect preserves uniformity of surface texture and color.
  • Due to its excellent release properties, little or no deposit of cement paste remains on the shutter surface.

Heavy-Duty Solvent Free Epoxy Floor Screed

EFS 99 is a high build three-pack epoxy floor screed system with high chemical and abrasion resistance property.

It provides non-dusting, easily cleaned, known slipping floor.

Uses

EFS 99 is a seamless protective floor topping used in industries with medium to high vehicular traffic like power plants, exhibition halls, shops.

Pharmaceutical & fertilizer industries, laboratories, bakeries, supermarkets, showrooms, bottling plants, warehouses, breweries, garages.

Machine shops, chemical plants, dairies, hospitals, refineries, subways, electronics & computer industries, etc.

In areas where a high degree of cleanliness is required EFR 99 shall be used as a topcoat with the desired color finish.

Epoxy Flooring Ico Care

Features

  • High mechanical strength, hardwearing and durable
  • Very high Bond and Adhesive strength.
  • Good abrasion resistance
  • Chemical resistance – mostly industrial chemicals
  • Self-leveling, smooth, glossy and hygienic seamless surface
  • High impermeability
  • It does not support bacterial growth.
  • Easy to clean. Therefore, as a result, so, consequently, Therefore, as a result, so, consequently.

Surface Preparation, Therefore, as a result, so, consequently, Therefore, as a result, so, consequently.

A sound, clean and dry substrate is essential for successful coating application and in ensuring maximum bonding between the substrate and flooring system. Therefore, as a result, so, consequently.

The floor should be made dry (not more than 5% surface moisture) clean and free from laitance, dust, grease, paint, etc. Therefore, as a result, so, consequently, Therefore, as a result, so, consequently.

By scrubbing followed by thorough water wash and wire brushing and then air drying.

As the case may be, light sandblasting detergent wash and /or acid etching may also be done.

Damaged or uneven areas, cracks, etc. should be made good. Therefore, as a result, so, consequently

Mixing

Stir the base and hardener separately. Therefore, as a result, so, consequently

Mix hardener gradually into the base under continuous stirring as per the stated mixing ratio.

Continue the mixing for 3-4 minutes. Therefore, as a result, so, consequently

Epoxy Flooring Ico Care

Mix the aggregates into the mixed resin portion uniformly under continuous mechanical agitation.

Mix well for 5-6 minutes till the components become homogeneous. Therefore, as a result, so, consequently

Ensure proper leveling and full compaction of the freshly laid screed. Therefore, as a result, so, consequently

While application, the substrate temperature should be at least 5°C but not above 500C.

Technical Data

  • The appearance of hardening screed:- Closed textured even finish
  • Colour:- Off white
  • Mixing ratio:- Pack A: Pack B: Pack C = 2 :1: 11 by weight
  • Specific Gravity:- 1.8±0.2
  • Application Temperature:- Minimum +5°C
  • Coverage (Theoretical) :- 1.8kg /mm thickness
  • Pot life at 27˚C:- 45 minutes for 1kg mass.
  • Tack free time at 27˚C:- 4±1 hours
  • Initial cure at 270C, for pedestrian traffic:- After 24 hours
  • Full cure:- 7 days
  • Flash Point:- Base – Not less than 28°C, Hardener – Not less than 28°C
  • Shelf Life:- 24 Months

Self Leveling Floor Epoxy, Therefore, as a result, so, consequently, Therefore, as a result, so, consequently.

EFR 99 is a solventless three-pack self-leveling epoxy floor topping system with high chemical and abrasion resistance property. Therefore, as a result, so, consequently

Epoxy Flooring Ico Care
It provides non-dusting, easily cleaned, colored glossy surface. Therefore, as a result, so, consequently
EFR 99 is a seamless protective floor topping used in industries with medium to high vehicular traffic like power, plants, exhibition halls, shops.
Pharmaceutical & fertilizer industries, buildings, laboratories, bakeries, supermarkets, showrooms, bottling plants, warehouses, breweries, garages. Therefore, as a result, so, consequently

Machine shops, chemical plants, dairies, hospitals, refineries, subways, electronics & computer industries, etc.

Features
  • High mechanical strength, hardwearing and durable
  • Very high Bond and Adhesive strength. Therefore, as a result, so, consequently
  • Good abrasion resistance

Epoxy Flooring Ico Care

  • Chemical resistance – mostly industrial chemicals, Therefore, as a result, so, consequently
  • Self-leveling, smooth, glossy and hygienic seamless surface
  • High impermeability, Therefore, as a result, so, consequently
  • It does not support bacterial growth.
  • Easy to clean. Therefore, as a result, so, consequently
Surface Preparation
A sound, clean and dry substrate is essential for successful coating application and in ensuring maximum bonding between the substrate and flooring system. Therefore, as a result, so, consequently

As the case may be, light sandblasting detergent wash and /or acid etching may also be done. Damaged or uneven areas, cracks, etc. should be made good. Therefore, as a result, so, consequently

Stir the base and hardener separately. Therefore, as a result, so, consequently

Ico Care Epoxy Flooring
Mix hardener gradually into the base under continuous stirring as per the stated mixing ratio.
Continue the mixing for 3-4 minutes. Therefore, as a result, so, consequently
Mix the aggregates into the mixed resin portion uniformly under continuous mechanical agitation.
Mix well for 5-6 minutes till the components become homogeneous. Therefore, as a result, so, consequently

Leave a Reply