Floor Levelling Compounds | Chemicals, Concrete & Cement admixture
Abrasion Resistance Metallic Floor Hardener for Concrete
It is a specially manufactured metallic aggregate admixture with cement and stone.
A granite chip to provide the hardest surface to floorings and pavement.
which will remain wear-proof, dustproof, waterproof and oil-proof, etc.
By the use of ICO SURFACE HARDENER, the flooring and paving topping can be made hard surface which almost becomes wear and dustproof.
It is ideally suited for use in all types of industrial floors which are subjected to heavy traffic and load movement.
It does not allow any dampness or absorption of water and easy to clean by washing as the surface remains smooth without any hole or crevice etc.
Floor Levelling Compounds | Chemicals, Concrete & Cement admixture
Advantage
Wherever the flooring is subjected to medium to high abrasion due to the movement of steel wheels, heavy trucks, forklift or any other movement of heavy machinery.
The surface can be made dust-proof damp-proof with the use of ICO SURFACE HARDENER.
Technical Info
Heavy Duty Floor
part ICO SURFACE HARDENER to 4 parts cement by weight with 1 to 2 parts 6 mm down stone chips of mixed powder (cement & Surface Hardener) should be the normal mix proportion.
Note: In case of rounded/angular well-graded stone chips maximum amount ( i.e., 2 part of stone chips can be loaded.
Conduct a small site trial mix to ascertain the mixing proportion of available stone chips.
Firstly, ICO SURFACE HARDENER and the cement should be mixed thoroughly in a dry state.
The mixing procedure is the same as mentioned under the heading for Heavy Duty Floors.
Application
In large projects where it is possible to lay the floor in a single operation, the granolithic layer can be dispensed with.
Old work
Chip off the old concrete surface to a depth of at least 5 mm to 7 mm by mechanical means and clear all loose particles and dust from the surface.
No surface water should remain before the application of the cement slurry over the surface.
Precaution
Proper surface preparation is the essence of the success of ICO SURFACE HARDENER Floor Topping.
For finishing purposes, the steel trowel should always be used.
ICO Flortop E
Abrasion Resistant Industrial Flooring Aggregate
Description
Uses Ico Paints
ICO FLORTOP-E, when troweled into the surface of concrete floors, forms a toughened hard-wearing surface suitable for industrial use.
Features
- Provides build-in wear resistance and produces high abrasion resistant floor surface.
- Extreme surface density resists oil and water penetration.
- Non-rusting and easy maintenance.
- Fast construction with minimum site costs for materials handling and non-bonding problems.
Process
Application Data
Floor Concreting
The floor concrete should be structurally sound and placed following good concrete practices.
Floor Levelling Compounds | Chemicals, Concrete & Cement admixture
Mixing & Application
Always use full bags of ICO FLORTOP-E to ensure consistent grading.
Any ICO FLORTOP-E/Cement mix leftover can be stored for use the next day providing it is kept in airtight containers. Therefore, as a result, so, consequently, Therefore, as a result, so, consequently
ICO Flottop C
Self Leveling Floor Epoxy, Therefore, as a result, so, consequently, Therefore, as a result, so, consequently
Description, Therefore, as a result, so, consequently, Therefore, as a result, so, consequently
ICO Flottop C is a solventless three-pack self-leveling epoxy floor topping system with high chemical and abrasion resistance property. Therefore, as a result, so, consequently,
It provides non-dusting, easily cleaned, colored glossy surface. Therefore, as a result, so, consequently
Uses, Therefore, as a result, so, consequently, Therefore, as a result, so, consequently
ICO Flottop C is seamless protective floor topping used in industries with medium to high vehicular traffic like power, plants, exhibition halls, shops, pharmaceutical & fertilizer industries, buildings, laboratories, bakeries, supermarkets, showrooms, bottling plants, warehouses, breweries, garages, machine shops, chemical plants, dairies, hospitals, refineries, subways, electronics & computer industries, etc.
Features
- High mechanical strength, hardwearing and durable
- Very high Bond and Adhesive strength. Therefore, as a result, so, consequently
- Good abrasion resistance
- Chemical resistance – mostly industrial chemicals, Therefore, as a result, so, consequently
- Self-leveling, smooth, glossy and hygienic seamless surface
- High impermeability, Therefore, as a result, so, consequently
- It does not support bacterial growth.
- Easy to clean. Therefore, as a result, so, consequently
Application, Therefore, as a result, so, consequently, Therefore, as a result, so, consequently
Surface Preparation, Therefore, as a result, so, consequently, Therefore, as a result, so, consequently
A sound, clean and dry substrate is essential for successful coating application and in ensuring maximum bonding between the substrate and flooring system. Therefore, as a result, so, consequently
By scrubbing followed by thorough water wash and wire brushing and then air drying.
As the case may be, light sandblasting detergent wash and /or acid etching may also be done.
Damaged or uneven areas, cracks, etc. should be made good. Therefore, as a result, so, consequently
Mixing
Stir the base and hardener separately. Therefore, as a result, so, consequently
Mix hardener gradually into the base under continuous stirring as per the stated mixing ratio.
Continue the mixing for 3-4 minutes. Therefore, as a result, so, consequently
Mix the aggregates into the mixed resin portion uniformly under continuous mechanical agitation.
Mix well for 5-6 minutes till the components become homogeneous.
