GROUTING (Engineerplus)

GROUTING (Engineerplus) is the process of injecting material into cavities or cracks in concrete, masonry structure, soil, rock-mass to increase the structure’s load-bearing capacity refers to grouting and the material used for this objective is called grout.

Non shrink Grout Additive for Cement is powder admixture, which after mix with cement, cement-sand, mortar or concrete ingredients flowable grout at low water cement ratio for high interfacial contact and shrinkage compensation by exanding during initial setting of the mix. Advantages: Produces free flowing expansive grouting slurry even at low w/c for shrinkage compensation and retention of the filled volume. Effective on cement, cement-sand, mortar and concrete ingredients. Effective for achieving high early strength. Easy to mix, economical, non corrosive, non toxic.

Uses  of GROUTING (Engineerplus):

NSGA-99 is recommended to mix with cement slurry to get a free flowing expansive grout for under noted application. 

  • Grouting of machine foundation. 
  • Concrete anchors. 
  • Grouting of pre-stressed anchors in rock and soil. 
  • Grouting of castle ducts. Grouting of cavities, gaps, recesses etc. Grouting of bearing plates. 
  • Grouting of boiler foundation. 
  • Injection grouting of porous concrete structures in rehabilitation works.

GROUTING (Engineerplus) Work Procedure :

Technical Specification : The procedure of our system of water proofing is injection grouting with chemical & cement .

The procedure of our system of water proofing is injection grouting with chemical & cement for negative pressure water circulation & seepage on wall. Grouting work with the cement slurry enriched with grouting additive of ICO CAM-99 & water cement ration as applicable. This work included to fixing the nipple by quick setting chemical ICS-99.  The slurry shall be properly mix & grouted with standard pressure grouting pump including drilling the hole of suitable dye, fixing GI/plastic nasal with cement mortar etc. After grouting remove nipple & fill the nipple hole by mix of cement & ICS-99 & CAM99.

GROUTING (Engineerplus)

1.Grouting in foundation whenever require.

2.Grouting in retaining wall of basement to stop seepages.

(iii)Under ground tank

(iv)Over head tank



(vii)Hollo roof etc..

GROUTING (Engineerplus) Details

GROUTING (Engineerplus)
GROUTING (Engineerplus)